|

ACT-14 DATA COMMUNICATION TRAINER
-
Communication Protocol
- Two 9 pin D-type RS-232 ports for Serial Communication
- Two 25 pin D-type LPT ports for Parallel Communication
- ASCII code identification are provided on led indicators
-
Fiber Optic Communication
- Transmission using Fiber optic LED’s having peak wave length of 660nm
- Reception using Fiber optic photo detector
- Core is Step indexed multimode PMMA plastic cable
- Operating Baud rate is 115200 bps
- Length of Fiber is one meter.
-
Wireless Communication
- 920 nm IR LED for Infrared Transmission
- Infrared Receiver using Photo detector with TTL logic output
- Operating Baud rate is 2400 bps
- 38 KHz demodulation Carrier Frequency
-
Modem Communication
- FSK Modulation technique
- 300 KHz Mark Frequency Modulation
- 200 KHz Space Frequency Modulation
- Demodulation using PLL Detector
- 300 KHz Mark Frequency Demodulation
- 200 KHz Space Frequency Demodulation
- Operating Baud rate is 19200 bps
- Serial-RJ 11 Connector Interface type
- Two RJ 11Connector
- Interconnections
- All interconnections are made using 2mm banana Patch cords.
-
Test points are provided to analyze signals at various points.
-
All ICS are mounted on IC Sockets.
-
Bare board Tested Glass Epoxy SMOBC PCB is used.
-
In-Built Power Supply of +5V/1.5A, ±12V/250mA with Power ON indication
-
Attractive Wooden enclosures of Light weight Australian Pine Wood.
-
Set of 2mm Patch cords for interconnections
-
User’s Manual with sample experimental programs
-
LIST OF EXPERIMENTS:
- Study of Serial Port
- Study of Parallel Port
- Study of Synchronous Serial Communication
- Study of Asynchronous Serial Communication
- Study of PC-PC Serial Communication using RS-232 cable
- Study of different Modem used in Serial Communication
- Study of Flow controls in Serial Communication
- Study of Protocols in Serial Communication
- Study of Fiber Optic Communication
- Study of Modem Communication
- Study of Wireless Communication
- Study of PC-PC Parallel Communication using DB25 cable
- Study of printer interface using parallel port
|