inner-banner_dtk
     
 
digital trainer kit
  • 10 Logic Level Inputs & 10 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Logic Pulsar, Logic Probe, Potentiometers of 1K, 10K 100K
  • Bread Board of 1260 tie points
  • Sine, Square and Triangular output waveform from 0-200Khz.
  • Fixed DC, Variable DC, AC power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
DTK_1B
digital trainer kit
  • 10 Logic Level Inputs & 10 LED for output indication.
  • Bread Board of 630 tie points.
  • Sine, Square and Triangular output waveform from 0-200Khz.
  • Fixed DC, Variable DC, AC power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
digital trainer kit
  • 10 Logic Level Inputs & 10 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Logic Pulsar, Logic Probe
  • 4 digit 7 Segment Display
  • Bread Board of 1260 tie points
  • Fixed DC +5V, ±12V power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
digital trainer kit
  • 10 Logic Level Inputs & 10 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Logic Pulsar, Logic Probe, Four Digit BCD 7-Segment Display.
  • Bread Board of 1260 tie points.
  • Fixed DC +5V, ±12V power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
digital ic trainer kit
  • 10 Logic Level Inputs & 10 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Logic Pulsar, Logic Probe, Three Digit 7-Segment Display.
  • Bread Board of 630 tie points
  • One IC each of 7400, 7402, 7408, 7432, 7404, 7490, 7495, 7486, 7447 & Two Nos. of IC 747.
  • 20 Pin Socket- 1No.
  • Fixed DC +5V, ±12V power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
linear ic trainer kit
  • 4 LED for output indication.
  • Bread Board of 630 tie points
  • One IC each of 555, 741, LF398, MCT2E, Transistor, Diodes.
  • Resistor & Capacitor bank, SPDT Relay, Speaker.
  • Two 8 Pin Socket, Potentiometers of 1K, 10K 100K
  • Sine, Square and Triangular output waveform from 0-200Khz.
  • Fixed DC, Variable DC, AC power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
basics electronics trainer kit
  • 16 Logic Level Inputs & 16 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Dual Logic Pulsar, Logic Probe, SPDT Relay, Buzzer, Bar LED display, DPM for Voltage & Current, Potentiometers of 1K, 1M,
  • Two digit 7 segment display with HEX to 7 segment decoder.
  • Bread Board of 1260 tie points
  • Sine, Square and Triangular output waveform from 0-200Khz.
  • Fixed DC +5V, ±12V power supply.
  • All interconnections are made using 2mm banana Patch cord.
View DataSheet
 
 
digital electronics trainer kit
  • 8 TTL/CMOS Logic Level Inputs with indicator LED for Logic Low & Logic High.
  • 10 output LED’s for Logic level Indicators.
  • Two digit BCD to 7 segment decoder.
  • Fixed (TTL) Clock generator of 1Hz, 100Hz, 10KHz, 100KHz.
  • Four Pulser Generator with Eight debounced Output.
  • On-board two 10K Variable Potentiometer.
  • On-board two BCD Thumbwheel Switch, Buzzer.
  • On-board +12V SPDT Relay for Control application.
  • Fixed DC Power Supply: +5V/1A, ±12V/250mA, Variable DC Power supply of 0 to +15V/250mA output.
  • Set of 2mm Banana Patch Cords.
  • Should support DN series ready to use Electronics board.
View DataSheet
 
 
anadigi electronics trainer kit
  • 12 TTL/CMOS Logic Level Inputs with indicator LED for Logic Low & Logic High.
  • 10 output LED’s for Logic level Indicators.
  • Two digit BCD to 7 segment decoder.
  • Fixed (TTL) Clock generator of 1Hz, 100Hz, 10KHz, 100KHz.
  • Signal Generator Five step 200 Khz SINE, SQUARE(TTL), TRAINGLE output, Sine/Traingle Output Voltage - 20V p-p max.
  • Logic Probe to detect High/Low level pulses, with bi-colour LEDs to indicate Facility.
  • Single Pulser Generator with two debounced Output.
  • On-board 10K Variable Potentiometer, Buzzer.
  • On-board +12V SPDT Relay for Control application.
  • Fixed DC Power Supply: +5V/1A, ±12V/250mA.
  • Variable DC Power supply of 0 to +15V/250mA output.
  • Set of 2mm Banana Patch Cords.
  • Should support DN series ready to use Electronics board.
View DataSheet
 
 
Digital/Analog Trainer Kit | Basic Electronics Trainer Kit | Power Supply | Function Generator | IC Tester | EPROM Programmer |
| Microprocessor Trainer Kit | Microcontroller Trainer Kit | Embedded Development Board | VLSI Trainer Kit | Interface and Study Cards |
| Communication Trainer Kit | Fibre Optics Trainer Kit | Instrumentation Trainer Kit | Instrumentation & Controls Lab Trainer Kit
Home  |  About Us  |  Products  |  Client List  |  Mission and Vision  |  Contact Us
 Copyright © 2012   KITEK TECHNOLOGIES PVT. LTD.  All Right Reserved  Promoted By B2B RESPONSE MEDIA